As we sell lots of soda syphons and the accessories we thought we’d upload some helpful hints about filling, using and cleaning them.
Filling your Soda Syphon
Press the lever on the head to ensure syphon is not charged (under pressure). If it is press the lever until all the water has been removed.
Unscrew head and remove syphon tube, making sure the plastic sleeve stays inside. Fill the syphon body to the top with cold water, (A). If the level falls after filling DO NOT top up again as this will overfill the syphon.
Replace the syphon tube and screw on head tightly – take care not to cross the threads. (B).
Insert bulb into bulb holder and screw firmly onto syphon head. The bulb is automatically pierced and the gas discharged. The syphon is charged when gas cannot be heard bubbling into the water (about 30 seconds).
Shake syphon vigorously for at least 10 seconds.
Remove bulb holder. There will be a gentle pop or hiss which will stop in a few seconds.
- Do not fill the syphon without making sure the plastic sleeve is in position inside the syphon body.
- Do not use more than one bulb per fill.
- Do not fill the syphon with warm water unless you are cleaning it.
- Before using a syphon for the first time or if the syphon has been stored for a long time it should first be rinsed out.